PID Temp Controller- Custom Enclosure

Category:

    Description

    When you require precise heating, our PID temperature controller dual setup can meet the most demanding temperature or process applications.

    Fuzzy Logic Digital Heater PID Temperature Controller which features:

    • Temperature Range from -200 to 1800C
    • Ability to change Set Point easily
    • Duel 4-digit LED Display to show Process value and Set Point
    • Easy ability to display Celsius or Fahrenheit
    • NEMA 4X water-proof enclosure
    • 10’ long power cord – rubber insulated
    • Mounted in Aluminum Enclosure with Extruded Sides

    SPECIFICATIONS

    • Inputs: Thermocouple, RTD, DC voltages or DC current
    • Display: Two 4-digit, 7 segment .25″ H (6.35 mm) LED’s. PV: red; SV: green
    • Accuracy: ±0.25% span, ±1 least significant digit
    • Supply Voltage: 100 to 240 VAC, 50/60 Hz
    • Power Consumption: 5 VA max
    • Operating Temperature: 32 to 122° F (0 to 50°C)
    • Memory Backup: Nonvolatile memory
    • Control Output Ratings: Relay: SPST, 5A@ 250 VAC resistive
    • Solid State Relay output – up to 25 amps @120v or 240v
    • Voltage pulse: 14V, 10% to -20% (max 40 mA); Current: 4 to 20 mA
    • Communication: RS-485 Modbus® A-5-11/RTU communication protocol
    • Weight: 4 oz (114 g)
    • Agency Approvals: CE, UL, cUL
    • Front Panel Rating: NEMA 4X (IP66)

    View Spec Sheet

    SIZE

    Dual Controller Configuration: 2.11″ high x 6.68″ wide x 6.3″ long/deep
    Single Controller Configuration: 1.77″ high x 4.27″ wide x 6.3″ long/deep

    Additional information

    PID Temperature Controllers

    Dual Controller Configuration, Single Controller Configuration

    The temperature/process control panel offers advanced control features for the most demanding temperature or process applications. Each PID Controller is enclosed in a 1/32 DIN housing. The Process Control Panel is designed with dual, 4-digit LED displays for local indication of process value and setpoint. Control methods include ON/OFF, PID, self-tune, and manual tune. PID control is supported with 64 temperature and time (ramp/soak) control actions. The dual loop output control allows simultaneous heating and cooling control. The second output can be configured as an alarm mode using one of the thirteen built-in alarm functions. RS-485 communication is standard. Up to 247 communication addresses are available with transmission speeds of 2400 to 38,400 bps. The controller also features universal input, selectable temperature units (°F ,°C), selectable resolution, quick sampling rate and security protection.

    • Designed for Two Inputs and Two Outputs
      (possible to use only one)
    • Mounted in an aluminum enclosure with Extruded Sides
    • Utilize PID/Self Tune for accuracy
    • Staff ability to change Set Point if needed
      (maximum set point will be pre-set to prevent user errors)
    • Power output from Solid State Relays
    • Sturdy Rocker Style On/Off Power Switch
    • 10′ Power Cord
    • Equipped with EcoMate Quick disconnect terminals at the back of the enclosure to mate with CHR Inc. Heaters
    SPECIFICATIONS

    Inputs: Thermocouple, RTD, DC voltages or DC current
    Display: Two 4-digit, 7 segment .25″ H (6.35 mm) LED’s. PV: red; SV: green
    Accuracy: ±0.25% span, ±1 least significant digit
    Supply Voltage: 100 to 240 VAC, 50/60 Hz
    Power Consumption: 5 VA max
    Operating Temperature: 32 to 122° F (0 to 50°C)
    Memory Backup: Nonvolatile memory
    Control Output Ratings: Relay: SPST, 5A@ 250 VAC resistive
    Solid State Relay output – up to 25 amps @120v or 240v
    Voltage pulse: 14V, 10% to -20% (max 40 mA); Current: 4 to 20 mA
    Communication: RS-485 Modbus® A-5-11/RTU communication protocol
    Weight: 4 oz (114 g)
    Agency Approvals: CE, UL, cUL
    Front Panel Rating: NEMA 4X (IP66)

    ACCESSORIES

    SCD-SW, Configuration Software
    SCD-SW, Configuration Software A-277, 250 Ohm Precision Resistor
    MN-1, Mini-Node™ USB/RS-485 converter
    A-600, R/C snubber

    SIZE

    Dual Controller Configuration: 2.11″ high x 6.68″ wide x 6.3″ long/deep
    Single Controller Configuration: 1.77″ high x 4.27″ wide x 6.3″ long/deep